The Royal Navy Discussions and Updates

StobieWan

Super Moderator
Staff member
Came across this article which has a model of the Type 26. I see there are two VLS systems. I wonder why two different systems were chosen. I think most nations would simply go for 48 VLS.

NovAtel’s GPS Anti-Jam Technology Selected for Royal Navy’s Type 26 Frigate

Some of this is pull through from the type 23's - the Sea Ceptor is a soft launch system and quite light which gives a few interesting opportunities to mount missiles higher than heavier systems and the original plan was to fit Type 23 with Sea Ceptor in the same place that the outgoing Sea Wolf silos were located. Now, Sea Wolf VLS, it's not quite a bottle with a bit of wood attached to the missile but it's not very complex and Sea Ceptor was very much designed with that foot print in mind.

The Mk41's that will also be installed, they're much larger (I believe they're talking strike length cells?) and likely not intended for air defence missiles, although they could of course launch the full range of Mk41 compatible articles.

Where it could get very silly is if the Type 45 ever got those additional cells, and ended up with Mk41 as well - leaving it with Sylver and Mk41..I'm not saying it's going to happen but it'd be interesting if it did ;)
 

swerve

Super Moderator
Came across this article which has a model of the Type 26. I see there are two VLS systems. I wonder why two different systems were chosen. I think most nations would simply go for 48 VLS.

NovAtel’s GPS Anti-Jam Technology Selected for Royal Navy’s Type 26 Frigate
A strike length Mk 41 is twice as tall as is needed for Sea Ceptor, & heavy & expensive compared to dedicated Sea Ceptor launchers. Flexibility is useful, but fitting strike length Mk 41 launchers with the intention of filling them with Sea Ceptor is a waste of money, space & weight.
 

t68

Well-Known Member
A strike length Mk 41 is twice as tall as is needed for Sea Ceptor, & heavy & expensive compared to dedicated Sea Ceptor launchers. Flexibility is useful, but fitting strike length Mk 41 launchers with the intention of filling them with Sea Ceptor is a waste of money, space & weight.

I wonder if that means the Kiwis are pulling out MK41 aswell?
 

swerve

Super Moderator
The ANZACs have self-defence length Mk 41 AFAIK, originally for Sea Sparrow, not strike length. It's much shorter. I can't remember if it's being replaced, but it could be, to reduce weight & maintenance.
 

htbrst

Active Member
The ANZACs have self-defence length Mk 41 AFAIK, originally for Sea Sparrow, not strike length. It's much shorter. I can't remember if it's being replaced, but it could be, to reduce weight & maintenance.
Yes, they were being removed and replaced with Sea Ceptor silos- at least that was the plan a few years ago - not much about the upgrade has come out since. Lots of commentators since seem to assume the mk 41 is staying though.

This APDR issue about the upgrade from 2014 states:

A Sea Ceptor Maritime Launcher System will be installed in place of the Mk 41 VLS, which will be removed.
 

vonnoobie

Well-Known Member
Yes, they were being removed and replaced with Sea Ceptor silos- at least that was the plan a few years ago - not much about the upgrade has come out since. Lots of commentators since seem to assume the mk 41 is staying though.

This APDR issue about the upgrade from 2014 states:
I'd say your getting the NZ and Australian vessels confused. NZ has elected to go for the Sea Ceptor and is having there Mk41's removed Australia however is retaining theres as we are fully involved in the design and manufacture of the ESSM's.
 

t68

Well-Known Member
I'd say your getting the NZ and Australian vessels confused. NZ has elected to go for the Sea Ceptor and is having there Mk41's removed Australia however is retaining theres as we are fully involved in the design and manufacture of the ESSM's.

Do yon know if the Kiwis are selling the MK41 or putting into storage for the NGF?
 

MrConservative

Super Moderator
Staff member
So that should put you in a good position with a possible UK built Kiwi T26/31e if they continue to use European combat systems.
Not strictly true about European systems. The CMS is from Lockheed Martin. The RNZN Anzacs are a bit of a global parts bin approach. That may well be what the replacement could be - designed in one country, built in another, weapons from another, CMS from somewhere else etc... By all accounts the replacement is a long time off. In fact since it is looking more likely post 2030, and the current $20B funding plan was only up to 2030 - one wonders if kicking that cost down the road a couple of years into the next timeframe say 2030 onwards means that the best solutions are made not the fiscally convenient for the time.
 

Systems Adict

The Bunker Group
Verified Defense Pro
BAE have released it's design for the Type 31e* frigate. Apparently it's partly based on the Omani Khareef class corvette design but will have a speed in excess of 25 knots and a range of around 7,500 nm.

*e = export
It is indeed based on the Oman Khareef corvette...
Khareef Class Corvettes - Naval Technology

Here's a link...

Type 31e DIMDEX | Newsroom | BAE Systems | International

At the base of the article, there's an embedded link, taking you to pretty pics that you can download & keep...

Related to this, here's a news article from the Company who will be PRIME beside BAE

Cammell Laird, BAE Systems focusing on exports for Type 31e frigate

...as well as another link to another article about some of the competition...

Babcock announces industry team for Type 31 frigate bid
 

StobieWan

Super Moderator
Staff member
That's probably not a bad bet - there's a few examples in the water and I'm sure it could be stretched by a few metres if the RN wanted that. Would they stick with diesels or go CODAG with say, an MT30 to get some more speed out of the design?
 

Systems Adict

The Bunker Group
Verified Defense Pro
That's probably not a bad bet - there's a few examples in the water and I'm sure it could be stretched by a few metres if the RN wanted that. Would they stick with diesels or go CODAG with say, an MT30 to get some more speed out of the design?

Here's the original RN / UK PLC Flyer for T31e...

https://www.royalnavy.mod.uk/-/medi...-launch-folder-line-diagram-v4-1.pdf?la=en-gb

My concerns are already all over that piece of paper....

#1 - It's currently 2018 & UK PLC NEEDS TO...

a. Agree who is going to build these ships
b. Settle what is going into them
c. Agree a build programme &..
d. Cut steel on the 1st ship by year end 2018

#2 - They want the 1st vessel ready & IN-SERVICE by 2023

#3 - The equipment they want, the open architecture / medium calibre gun & a myriad of other things.

How practical / achievable is it ?

I make the point of putting #1d out there, as that timescale is just 5 years from now.

HOW can the RN pick an alleged 'COTS' design, then modify it to meet THEIR needs & get it all for the mere price of £250m ?

Finally, T26 1st-of-class is due to 'enter service' in 2023, bearing in mind that she is actually under construction, so we really think that EVERYTHING is gonna just fall into place or is it gonna be yet another budget blowing cluster, just like the QEC build in sections & integrate at Rosyth process ??

I'm stumped...

SA
 

StobieWan

Super Moderator
Staff member
Here's the original RN / UK PLC Flyer for T31e...

https://www.royalnavy.mod.uk/-/medi...-launch-folder-line-diagram-v4-1.pdf?la=en-gb

My concerns are already all over that piece of paper....

#1 - It's currently 2018 & UK PLC NEEDS TO...

a. Agree who is going to build these ships
b. Settle what is going into them
c. Agree a build programme &..
d. Cut steel on the 1st ship by year end 2018

#2 - They want the 1st vessel ready & IN-SERVICE by 2023

#3 - The equipment they want, the open architecture / medium calibre gun & a myriad of other things.

How practical / achievable is it ?

I make the point of putting #1d out there, as that timescale is just 5 years from now.

HOW can the RN pick an alleged 'COTS' design, then modify it to meet THEIR needs & get it all for the mere price of £250m ?

Finally, T26 1st-of-class is due to 'enter service' in 2023, bearing in mind that she is actually under construction, so we really think that EVERYTHING is gonna just fall into place or is it gonna be yet another budget blowing cluster, just like the QEC build in sections & integrate at Rosyth process ??

I'm stumped...

SA

Put it that way, it's not going to happen - I've not kept up and thought 31 was away in the future a bit.

If they're due to be cutting steel in 2018, or even 2020, that's very ambitious..




I'd sooner they just built lots of 26 in serial production as I suspect things won't run smoothly with two builds but hey ho...
 

hauritz

Well-Known Member
Put it that way, it's not going to happen - I've not kept up and thought 31 was away in the future a bit.

If they're due to be cutting steel in 2018, or even 2020, that's very ambitious..

I'd sooner they just built lots of 26 in serial production as I suspect things won't run smoothly with two builds but hey ho...
I really can't understand the reasoning behind the type 31.

The pricing I have seen for this ship is either extremely optimistic or it is just going to be a glorified OPV. Even if they can keep the cost down to around a quarter of theType 26 I think I would rather have an additional Type 26 and perhaps build a couple more river class OPVs instead of the planned 5 type 31s.
 

ASSAIL

The Bunker Group
Verified Defense Pro
Here's the original RN / UK PLC Flyer for T31e...

https://www.royalnavy.mod.uk/-/medi...-launch-folder-line-diagram-v4-1.pdf?la=en-gb

My concerns are already all over that piece of paper....

#1 - It's currently 2018 & UK PLC NEEDS TO...

a. Agree who is going to build these ships
b. Settle what is going into them
c. Agree a build programme &..
d. Cut steel on the 1st ship by year end 2018

#2 - They want the 1st vessel ready & IN-SERVICE by 2023

#3 - The equipment they want, the open architecture / medium calibre gun & a myriad of other things.

How practical / achievable is it ?

I make the point of putting #1d out there, as that timescale is just 5 years from now.

HOW can the RN pick an alleged 'COTS' design, then modify it to meet THEIR needs & get it all for the mere price of £250m ?

Finally, T26 1st-of-class is due to 'enter service' in 2023, bearing in mind that she is actually under construction, so we really think that EVERYTHING is gonna just fall into place or is it gonna be yet another budget blowing cluster, just like the QEC build in sections & integrate at Rosyth process ??

I'm stumped...

SA
I'm going to take a shot here to answer the why.
T26 was supposed to be the "global Frigate" winning plenty of export orders an increasing the RN/Britains global influence.
The delays and cost blowouts scuppered that theory.
T31 was then envisioned to provide the replacement export winning design.
The problem though is that it is many years behind the rest of the pack with other navies already buying a plethora of modern euro Frigate designs and leaving Britain out in the cold. To remedy this T31 is then constrained to a ridiculously unrealistic price which further degrades its appeal.
The RN should be constructing further T26s to add to its orbat but it is so resource poor that there is no other option other than for it to forced into T31.

This is a diabolical situation for the RN to stomach but I guess T31 is better than an OPV however, luckily, it is possible to improve its effectiveness in the long term should the financial constraints be lifted.
As for the export prospects T31? They may win a few orders but the timing is terrible and it offers nothing extra over the other euro offerings which are already established. Britain has ignored the market for far too long.
 

John Fedup

The Bunker Group
Certainly a sad situation for the RN. How realistic is a £250 million Type 31 and what kit will it have for this price? Can't help but think a Type 26 stripped down might have a better cost/capability ratio and the actual bottom line might not be all that much higher than what a Type 31 is likely going to end up at. Perhaps 4 Type 26"Lites" instead of 5 Type 31s, especially if they are capable of being upgraded to a full Type 26.
 

swerve

Super Moderator
I really can't understand the reasoning behind the type 31.

The pricing I have seen for this ship is either extremely optimistic or it is just going to be a glorified OPV. Even if they can keep the cost down to around a quarter of theType 26 I think I would rather have an additional Type 26 and perhaps build a couple more river class OPVs instead of the planned 5 type 31s.
A Dutch-built OPV of the same size cost €120 million or so ten years ago. That type has very good AESA radars & electro-optical sensors, hangar & flight deck for an NH90, a 76mm gun & several light guns. How much would it cost to make it a few knots faster & add the extras the Type 31e has?

I find it odd that we keep getting told that twice the price (allowing for inflation) of a 3750 ton high-end OPV (a 'glorified' OPV), spent on a ship of the same size, can only buy us an OPV. Is British shipbuilding really so much more expensive than Dutch? Does it really cost us twice as much to build a ship? Is getting something significantly better for twice the price completely unrealistic?
 

John Fedup

The Bunker Group
Ya, you really have to wonder about inflation and " modification to our standards " costs. Our AOPS are another example, Norway built theirs for around $200 million about 10 years ago and our "Canadianized version" is over 3 times that. I am not sure if we are putting more exotic kit on board compared to Norway but I seriously doubt it.
 
Top